Daihatsu F300 Service Manual page 1193

ENGINE MECHANICALS
(4) Disconnect the coupler of solenoid valve wiring har-
ness.
(5) Disconnect the coupler of the water temperature sender
wiring.
8. Removal of fluid coupling with fan and fan shroud
(1) Remove the two clamps for clutch cable on the fan
shroud.
(2) Disconnect the water hose from the radiator upper tank.
(3) Remove the fluid coupling with fan from water pump
pulley by removing four nuts.
(4) Loosen the alternator pulley adjusting bolt.
(5) Remove the two attaching bolts of the fan shroud.
(6) Un-lock the lock section of fan shroud lower part from
the radiator by pulling up the fan shroud.
Remove the fan shroud together with fluid coupling fan.
9. Remove the V-ribbed belt and water pump pulley.
EM-52
WFEOO.EM139
•
a
#""
0
.....
...............
,,
ad'---
-~
Attaching
.,...,...
-
' f _
Lock section -..., bolt
•
WFE90-EM703
WFE90-EM142
•