Daihatsu F300 Service Manual page 1175

ENGINE MECHANICALS
8. Removal of fluid coupling with fan and fan shroud
(1) Disconnect the water hose from the radiator upper tank.
(2) Remove the four water pump pulley attaching nuts.
Then detach the fluid coupling with fan from the water
pump pulley tempporarily.
(3) Remove the drive belt by loosening the alternator pulley
adjusting bolt.
(4) Remove the water pump pulley.
(5) Remove the two fan shroud attaching bolts from the
radiator
(6) Unlock the lock section of the fan shroud lower part from
the radiator by pulling up the fan shroud.
(7) Remove the fan shroud together with fluid coupling with
fan from the engine comportment
[HO-E Engine]
3. Removal of the air cleaner and the air cleaner hose subas-
sembly.
( 1) Remove the tapping screw from the radiator fan shroud
upper side.
(2) Remove the clutch cable clamp provided at the air
cleaner.
(3) Remove the air cleaner hose attaching bolts provided
at the left fender panel and radiator center support.
Remove the three air cleaner attaching bolts. Then
remove the air cleaner and air cleaner hose subas-
sembly.
EM-34
•
•