Daihatsu F300 Service Manual page 1147

ENGINE MECHANICALS
TIMING BELT COVER
The timing belt cover is divided into two parts; the upper cover and lower cover. The ignition timing indicator
is mounted on the lower cover.
INTAKE MANIFOLD
Intake manifold is made of aluminum alloy. Design has been made so that the length from the throttle body
attaching section to the intake manifold installation section on the cylinder head may become equal in all
cylinders. Consequently, the air charging rate for each cylinder has been made uniformed.
In addition, the intake tube portion from the surge tank to the intake manifold adopts a diffuser type so as to
improve the air charging efficiency.
EM-6
•
•
•
•