Daihatsu F300 Service Manual page 1379

Hide thumbs Also See for F300:
Table of Contents

Advertisement

(3) Turn ON the ignition switch. (with the engine in a
stopped state)
At this time, a fuel pressure of 250 kPa (2.55 kgf/cm') is
being applied to the fuel line.
Under this conditions, check the fuel line system for
evidence of leakage.
If
any
leakage is present at the fuel line system, repair
leaky points. Recheck the system for leakage.
(4) Stop the engine.
(5) Remove the SST from the check terminal.
(6) Connect the check terminal cap to the check terminal.
EF-11
EFISYSTEM

Advertisement

Table of Contents
loading

Table of Contents