Daihatsu F300 Service Manual page 1250

•
•
•
•
(2) Disconnect the four injector connectors.
(3) Remove the engine wire clamps and engine ground
cables.
(4) Removal of engine wire from ECU
CD
Remove the ECU cover at the cowl side panel of the
passenger seat.
®
Disconnect the engine wire connector from the en-
gine control computer assembly (ECU).
®
Pull out the engine wire toward the engine compart-
ment.
(5) Remove the engine wire from the engine compartment.
14. Disconnection of fuel line
[HD-C
Engine]
Disconnect the fuel inlet hose and return hose from fuel
pump.
NOTE:
• Make sure to plug
the
disconnected hose so that no fuel
may flow out.
[HO-E Engine]
Disconnect the fuel hose at the upper part of fuel filter .
CAUTION:
• The pressure in the fuel line
is
kept 250 kPa (2.55 kgficm')
higher than the atmospheric pressure.
• Hence, when the fuel line is loosened,
be
sure
to
prevent
the fuel from splashing using an adequate doth or the
like.
• Furthermore, place a suitable container under the fuel
filter because the fuel flows out.
15.
Disconnect the fuel return hose from the pressure regulator.
CAUTION:
• When disconnecting the fuel hose, take precautionary
measures to prevent any dirt from entering into the fuel
line .
EM-109
ENGINE MECHANICALS