Daihatsu F300 Service Manual page 1285

ENGINE MECHANICAL$
3. Install the crankshaft rear end bearing, using the following
SST.
SST: 09286-87603-000
(1) Install the crankshaft rear end bearing to the SST.
(2) Press the crankshaft rear end bearing into the
crankshaft rear end.
NOTE:
• Be sure to press the bearing, until the end surface of the
SST contacts
with
the crankshaft rear end section.
• When pressing the bearing,
be
very careful not to allow
the bearing to tilt
DISASSEMBLY OF OIL PUMP
1. Detach the oil pump cover.
Disconnect the five attaching bolts.
2. Remove the front oil seal.
EM-144
,-----------,·
09286-87603-000
•
~Crankshaft
rear end bearing
..........
•
•