Daihatsu F300 Service Manual page 1305

ENGINE MECHANICALS
11. Insert the oil level gauge guide into the cylinder block.
12. Install the oil level gauge guide attaching bolts.
Tightening Torque: 18.6-30.4 N·m (1.9- 3.1 kgf-m)
13. Install the oil level gauge.
14. Installation oi timing belt
(1) Check the timing belt.
(See page EM-38.)
(2) Install the timing belt.
(See page EM-32.)
15. Install the timing belt cover.
(See page EM-45.)
16. Install the crankshaft pulley.
Tightening Torque: 19.6-29.4 N·m (2.0- 3.0 kgf-m)
NOTE:
• Prevent the crankshaft from turning, using the following
SST.
SST: 09210-87701-000
EM-164
•
•
•