Daihatsu F300 Service Manual page 1164

ENGINE MECHANICAL
• 7. Inspection of ignition timing
•
•
•
The ignition timing mark of crankshaft pulley is aligned with
the indicator of timing belt cover.
NOTE:
• This does not include the sub ignition timing advance of
the distributor .
8. Adjustment of idle speed
Engine Idle Speed
HO-C engine: 850
±
50 rpm
HO-E engine: 850
±
50
rpm
9. Check of fast idle
[HD-C Engine]
Preparation to be made prior to fast idle check
• All accessory switches are turned OFF.
On those vehicles equipped with a day-lamp system,
set the lamp control switch to the first stage.
• The air cleaner element is installed.
• All vacuum hoses are connected.
• Ensure that the intake system exhibits no air leakage.
• Ensure that the exhaust system exhibits no air leakage.
NOTE:
• HO-C engine is mounted with automatic choke carburetor.
Therefore, perform the engine fast idle check while the engine is cold .
EM-23