Daihatsu F300 Service Manual page 1239

ENGINE MECHANICALS
15. Installation of the power steering pump and drive belt
(P/S equipped vehicle only) (See page SR-54.)
(1) Install the power steering pump assembly into the posi-
tion.
(2) Install the power steering drive belt.
(3) Set the drive belt tension to the specified value by
tightening the adjusting bolt.
Specified Deflection: 9 - 11 mm
[When a toroe of 9BN (1 o kgf) is applied:]
(4) Tighten the bolts to the specified valve.
Tightening Torque:
® ..
.34.3- 44.1 N·m (3.5- 4.5 kgf-m)
@ ...
14.7- 21.6 N·m (1.5- 2.2 kgf-m)
© ...
49.0- 68.6 N·m (5.0- 7.0 kgf-m)
16. Connect the air breather hose to the radiator upper tank.
[HD-C
engine]
17. Connect the accelerator cable to the carburetor. Adjust the
accelerator cable so that the free play in
its
axial direction
may be 3-8 mm.
EM-98
'
'
\
/\
Pushing force of 98 N \
(10kgf) \
Air
•
•
•