ENGINE MECHANICALS
18. Installation of the air cleaner sub assembly
(1) Install the air cleaner sub assembly into posi1ion.
Tighten the three attaching bolts.
(2) Tighten the attaching bolts to the left fender panel and
radiator center support.
(3) Tighten the tapping screw at the fan shroud.
(4) Install the clutch cable clamp to the air cleaner.
19. Install the radiator reserve tank into position.
Clamp the water hose securely.
20. Installation of air intake chamber
(1) Install the air intake chamber by attaching the three
screws and two champs.
NOTE:
Align the matching marks provided on the air intake
chamber and air intake hose.
(2) Install the air intake hoses for air conditioner and power
steering idle up.
21. Connect the accelerator cable to the throttle body.
22. Adjust the accelerator cable so that the accelerator pedal
tree play may become 3 - 8 mm.
EM-100
•