Daihatsu F300 Service Manual page 1367

EMISSION CONTROL SYSTEM
INSTALLATION
1. Install a new gasket to the front exhaust pipe and tail pipe.
2. Install the three-way catalyst assembly to the front exhaust
pipe assembly.
Tightening Torque:
36.3- 51.0 N-m (3.7- 5.2 kgf-m)
NOTE:
• Make sure that the front mark is located at front side.
3. Tighten the attaching bolts and nuts for the three-way
catalyst at the tail pipe side.
Tightening Torque:
36.3- 51.0 N-m (3.7- 5.2 kgf-m)
4. Install the transmission under cover by attaching the eight
bolts.
EC-28
•
•
•
•