Daihatsu F300 Service Manual page 1253

ENGINE MECHANICALS
25. Removal of engine harness from engine
( 1) Disconnect the alternator connector.
(2) Remove the engine wire clamp.
(3) Remove the engine wire from engine.
26. Remove the crankshaft pulley by removing the four attaching
bolts.
NOTE:
• Prevent the crankshaft from turning, using the following
SST.
SST:
0921()..87701-000
27. Removal of timing belt (See page EM-24.)
(1) Remove the eight timing belt cover attaching bolts.
(2) Remove the timing belt covers No. 1 and No. 2.
(3) Loosen the attaching bolt of the timing belt tensioner.
Move the tensionerto the left as for as it will go and tighten
the bolt temporarily.
(4) Remove the timing belt.
EM-112
•
•
•
•