•
8. Remove the chain block from the engine.
•
•
•
9. Connect the connectors onto the
transmiss'1on
and transfer
by jacking up the vehicle. Connect the air breather hose
onto the transmission .
10. Connect the harness and wire.
[HD-C Engine]
(1) Clamp of battery negative
8
terminal to engine bracket
at battery carrier side
(2) Clamp of battery positive
Ei' J
terminal
to
starter at battery
carrier side
(3) Connector of cable leading to battery at battery carrier
side
[HD-E Engine]
(1) Clamp of battery negative
8
terminal to engine bracket
at battery carrier side
(2) Clamp of battery positive
Ei' J
temninal to starter at battery
carrier side
(3) Clamp of battery cable
Ei' J
leading to cowl at battery
carrier side
{4) Three connectors of cable leading to relay box at bat-
tery carrier side
11. Install the inlet and outlet hoses to the heater pipes at the
dash panel.
EM-167
ENGINE MECHANICAL$
"""''""'
~
\