Table of Contents
Advertisement
13.5.12 show ip pimsm rphash
This command displays the RP router that will be selected from the set of active RP routers. The RP router, for the group, is
selected by using the hash algorithm defined in RFC 2362.
▫
Format
show ip pimsm rphash <groupaddress>
▫
Mode
Privileged EXEC and User EXE
CRP IP Address
Group Mask
13.5.13 show ip pimsm staticrp
This command displays the static RP information for the PIM-SM router.
▫
Format
show ip pimsm staticrp
▫
Mode
Privileged EXEC and User EXE
CRP IP Address
Group Address
Group Mask
13.5.14 show ip pimsm
This command displays the system-wide information for PIM-SM.
▫
Format
show ip pimsm
▫
Mode
Privileged EXEC and User EXEC
PIM-SM Admin Mode
Join/Prune Interval (secs) This field shows the interval at which periodic PIM-SM Join/Prune messages are to be
Data Threshold Rate (K
bits/sec)
Register Threshold Rate
(K bits/sec)
This field displays the IP address of the RP.
This field displays the group mask for the group address.
This field displays the IP address of the RP.
This field displays the group address supported by the RP.
This field displays the group mask for the group address..
This field indicates whether PIM-SM is enabled or disabled. This is a configured value.
sent. This is a configured value.
This field shows the data threshold rate for the PIM-SM router. This is a configured value.
This field indicates the threshold rate for the RP router to switch to the shortest path. This
is a configured value.
516
User's Manual of WGS3-2820/WGS3-5220
Advertisement
Table of Contents
