Planet Networking & Communication WGS3-2820 User Manual page 119

This could take up to 10 to 30 seconds to become effective
Notice:
4.3.5.3 VLAN Status
Use this page to display the IGMP Snooping VLAN status.
Non-Configurable Data
。 VLAN ID - All Vlan Ids for which the IGMP Snooping mode is Enabled.
。 Admin Mode - Igmp Snooping Mode for Vlan ID.
。 Fast Leave Admin Mode - Fast Leave Mode for Vlan ID.
。 Group Membership Interval - Group Membership Interval of IGMP Snooping for the specified VLAN ID.
Valid range is 2 to 3600.
。 Maximum Response Time - Maximum Response Time of IGMP Snooping for the specified VLAN ID.
Valid range is 1 to 3599.
Its value should be greater than group membership interval value.
。 Multicast Router Expiry Time - Multicast Router Expiry Time of IGMP Snooping for the specified VLAN ID.
Valid range is 0 to 3600.
4.3.5.4 VLAN Configuration
Use this page to setup the IGMP Snooping VLAN configuration.
Figure 4-3-21 IGMP Snooping VLAN Status
119
User's Manual of WGS3-2820/WGS3-5220