Vlan Acceptframe; Vlan Ingressfilter; Vlan Makestatic - Planet Networking & Communication WGS3-2820 User Manual

This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved for the default VLAN).
VLAN range is 2-4094.
▫
Format no vlan <2-4094>
▫
Mode VLAN database

8.6.65 vlan acceptframe

This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames or priority frames
received on this interface are discarded. For Admit All mode, untagged frames or priority frames received on this interface are
accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
▫
Default Admit All
▫
Format vlan acceptframe {vlanonly | all}
▫
ModeInterface Config
8.6.65.1 no vlan acceptframe
This command sets the frame acceptance mode per interface to Admit All. For Admit All mode, untagged frames or priority
frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option,
VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
▫
Format vlan acceptframe {vlanonly | all}
▫
Mode Interface Config

8.6.66 vlan ingressfilter

This command enables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the
VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
▫
Default Disabled
▫
Format vlan ingressfilter
▫
Mode Interface Config
8.6.66.1 no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the
VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
▫
Format no vlan ingressfilter
▫
Mode Interface Config

8.6.67 vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP registration) to a static VLAN (one that is
permanently configured and defined). The ID is a valid VLAN identification number. VLAN range is 2-4094.
▫
Format vlan makestatic <2-4094>
▫
Mode VLAN database
User's Manual of WGS3-2820/WGS3-5220
370