Planet Networking & Communication WGS3-2820 User Manual page 90

DHCPREQUEST - Specifies the number of DHCPREQUEST messages received by the DHCP Server.
。
DHCPDECLINE - Specifies the number of DHCPDECLINE messages received by the DHCP Server.
。
DHCPRELEASE - Specifies the number of DHCPRELEASE messages received by the DHCP Server.
。
DHCPINFORM - Specifies the number of DHCPINFORM messages received by the DHCP Server.
。
DHCPOFFER - Specifies the number of DHCPOFFER messages sent by the DHCP Server.
。
DHCPACK - Specifies the number of DHCPACK messages sent by the DHCP Server.
。
DHCPNAK - Specifies the number of DHCPNAK messages sent by the DHCP Server.
。
Command Buttons
Refresh - Refresh the data on the screen to the latest state.
。
Clear Server Statistics - Reset DHCP Server Statistics.
。
4.2.11.7 Conflicts Information
DHCP Server Conflicts Information
Selection Criteria
DHCP Conflict - Specifies whether information is to be displayed for a Specific Address Conflict or for All Address
。
Conflicts.
Conflict IP Address - IP Address of the conflict to be shown. This field appears only if the user has selected
。
"Specific Address Conflict" in DHCP Conflict.
Non-Configurable Data
IP Address - Specifies the IP Address of the host as recorded on the DHCP server.
。
Detection Method - Specifies the manner in which the IP address of the hosts were found on the DHCP Server.
。
Detection Time - Specifies the time when the conflict was detected in N days NNh:NNm:NNs format with respect to
。
the system up time.
Command Buttons
Submit - Displays information about the chosen conflict(s).
。
Figure 4-2-58 DHCP Server Conflicts Information
90
User's Manual of WGS3-2820/WGS3-5220