Planet Networking & Communication WGS3-2820 User Manual page 82

4.2.10.2 Trap Log
This screen lists the entries in the trap log. The information can be retrieved as a file by using System Utilities, Upload File from
Switch.
Non-Configurable Data
Number of Traps since last reset - The number of traps that have occurred since the last time the switch was
。
reset.
Number of Traps since log last viewed - The number of traps that have occurred since the traps were last
。
displayed. Displaying the traps by any method (terminal interface display, Web display, upload file from switch etc.)
will cause this counter to be cleared to 0.
Log - The sequence number of this trap.
。
System Up Time - The time at which this trap occurred, expressed in days, hours, minutes and seconds since the
。
last reboot of the switch.
Trap - Information identifying the trap.
。
Figure 4-2-48 Trap Flags
Figure 4-2-49 Trap Log
82
User's Manual of WGS3-2820/WGS3-5220