Planet Networking & Communication WGS3-2820 User Manual page 42

4.2.3.2 Switch Configuration
This page includes the following fields:
Broadcast Storm Recovery Mode - Enable or disable this option by selecting the corresponding line on the
。
pull-down entry field. The factory default is disabled.
IEEE 802.3x Flow Control Mode - Enable or disable this option by selecting the corresponding line on the
。
pull-down entry field. The factory default is disabled.
Lag Static Capability Mode - May be enabled or disabled by selecting the corresponding line on the pull-down
。
entry field. The factory default is disabled.
Figure 4-2-3 System Description
Figure 4-2-4 Switch Configuration
42
User's Manual of WGS3-2820/WGS3-5220