Planet Networking & Communication WGS3-2820 User Manual page 173

Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately. These
。
changes will not be retained across a power cycle unless a save is performed.
Delete ACL - Removes the currently selected ACL from the switch configuration.
。
4.5.1.2 IP ACL Summary
This page shows the configuration summary of access control list.
Non-Configurable Data
ACL ID - The ACL identifier.
。
Rules - The number of rules currently configured for the ACL.
。
Slot.Port(s) - The interfaces to which the ACL applies.
。
Direction - The direction of packet traffic affected by the ACL.
。
Direction can only be one of the following:
Inbound
。
Figure 4-5-2 ACL Summary
173
User's Manual of WGS3-2820/WGS3-5220