Planet Networking & Communication WGS3-2820 User Manual page 95

4.2.12.4 Server Status
Non-Configurable Data
Address - Specifies all the existing Server Addresses. If no Server configuration exists, a message saying "No
。
SNTP server exists" flashes on the screen.
Last Update Time - Specifies the local date and time (UTC) that the response from this server was used to update
。
the system clock.
Last Attempt Time - Specifies the local date and time (UTC) that this SNTP server was last queried.
。
Last Attempt Status - Specifies the status of the last SNTP request to this server. If no packet has been received
。
from this server, a status of Other is displayed.
•
OtherNone of the following enumeration values.
•
SuccessThe SNTP operation was successful and the system time was updated.
•
Request Timed OutA directed SNTP request timed out without receiving a response from the SNTP
server.
•
Bad Date EncodedThe time provided by the SNTP server is not valid.
•
Version Not SupportedTheSNTP version supported by the server is not compatible with the version
supported by the client.
•
Server UnsychronizedThe SNTP server is not synchronized with its peers. This is indicated via the
'leap indicator' field on the SNTP message.
•
Server Kiss Of DeathThe SNTP server indicated that no further queries were to be sent to this server.
This is indicated by a stratum field equal to 0 in a message received from a server.
Unicast Server Num Requests - Specifies the number of SNTP requests made to this server since last agent
。
reboot.
Unicast Server Num Failed Requests - Specifies the number of failed SNTP requests made to this server since
。
last reboot.
Figure 4-2-62 SNTP Server Status
95
User's Manual of WGS3-2820/WGS3-5220