No Ip Route Distance - Planet Networking & Communication WGS3-2820 User Manual

▫
Format ip route distance <1-255>
▫
Mode Global Config

12.2.12 no ip route distance

This command sets the default static route preference value in the router. Lower route preference values are preferred when
determining the best route.
▫
Format no ip route distance
▫
Mode Global Config
12.2.13 ip forwarding
This command enables forwarding of IP frames.
▫
Default enabled
▫
Format ip forwarding
▫
Mode Global Config
12.2.14 no ip forwarding
This command disables forwarding of IP frames.
▫
Format no ip forwarding
Mode Global Config
12.2.15 ip netdirbcast
This command enables the forwarding of network-directed broadcasts. When enabled, network directed broadcasts are
forwarded. When disabled they are dropped.
▫
Default disabled
▫
Format ip netdirbcast
▫
Mode Interface Config
12.2.16 no ip netdirbcast
This command disables the forwarding of network-directed broadcasts. When disabled, network directed broadcasts are
User's Manual of WGS3-2820/WGS3-5220
436