Router - Planet Networking & Communication WGS3-2820 User Manual

4.6.5 Router

4.6.5.1 Router Table
Non-Configurable Data
。 Network Address - The IP route prefix for the destination.
。 Subnet Mask - Also referred to as the subnet/network mask, this indicates the portion of the IP interface address that
identifies the attached network.
Protocol - This field tells which protocol created the specified route. The possibilities are one of the following:
。
Local
Static
Default
OSPF Intra
OSPF Inter
OSPF Type-1
OSPF Type-2
RIP
BGP4
Next Hop Slot/Port - The outgoing router interface to use when forwarding traffic to the destination.
。
。 Next Hop IP Address - The outgoing router IP address to use when forwarding traffic to the next router (if any) in the
path towards the destination. The next router will always be one of the adjacent neighbors or the IP address of the
local interface for a directly attached network.
。 Total Number of Routes - The total number of routes in the route table.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
。
Figure 4-6-31 Router Route Table
246
User's Manual of WGS3-2820/WGS3-5220