Planet Networking & Communication WGS3-2820 User Manual page 69

Table of Contents

Advertisement

This page shows the detail information of the switch, including the following data:
ifIndex - This object indicates the ifIndex of the interface table entry associated with the Processor of this switch.
Octets Received - The total number of octets of data received by the processor (excluding framing bits but
including FCS octets).
Unicast Packets Received - The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Multicast Packets Received - The total number of packets received that were directed to a multicast address.
Note that this number does not include packets directed to the broadcast address.
Broadcast Packets Received - The total number of packets received that were directed to the broadcast address.
Note that this does not include multicast packets.
Receive Packets Discarded - The number of inbound packets which were chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a higher-layer protocol. A possible reason for
discarding a packet could be to free up buffer space.
Octets Transmitted - The total number of octets transmitted out of the interface, including framing characters.
Packets Transmitted Without Errors - The total number of packets transmitted out of the interface.
Unicast Packets Transmitted - The total number of packets that higher-level protocols requested be transmitted
to a subnetwork-unicast address, including those that were discarded or not sent.
Multicast Packets Transmitted - The total number of packets that higher-level protocols requested be transmitted
to a Multicast address, including those that were discarded or not sent.
Broadcast Packets Transmitted - The total number of packets that higher-level protocols requested be
transmitted to the Broadcast address, including those that were discarded or not sent.
Transmit Packets Discarded - The number of outbound packets which were chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a higher-layer protocol. A possible reason for
discarding a packet could be to free up buffer space.
Most Address Entries Ever Used - The highest number of Forwarding Database Address Table entries that have
been learned by this switch since the most recent reboot.
Address Entries in Use - The number of Learned and static entries in the Forwarding Database Address Table for
this switch.
Maximum VLAN Entries - The maximum number of Virtual LANs (VLANs) allowed on this switch.
Most VLAN Entries Ever Used - The largest number of VLANs that have been active on this switch since the last
reboot.
Static VLAN Entries - The number of presently active VLAN entries on this switch that have been created
statically.
Dynamic VLAN Entries - The number of presently active VLAN entries on this switch that have been created by
GVRP registration.
VLAN Deletes - The number of VLANs on this switch that have been created and then deleted since the last
reboot.
Time Since Counters Last Cleared - The elapsed time, in days, hours, minutes, and seconds, since the statistics
for this switch were last cleared.
User's Manual of WGS3-2820/WGS3-5220
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs3-5220

Table of Contents