Table of Contents
Advertisement
Metric
Local Address
Generation ID
The following fields are displayed only if DVMRP is enabled on this interface.
Received Bad Packets
Received Bad Routes
Sent Routes
13.2.6 show ip dvmrp neighbor
This command displays the neighbor information for DVMRP.
▫
Format
show ip dvmrp neighbor
▫
Modes
Privileged EXEC User EXEC
IfIndex
Nbr IP Addr
State
Up Time
Expiry Time
Generation ID
Major Version
Minor Version
Capabilities
is a configured value.
This field indicates the metric of this interface. This is a configured value.
This is the IP Address of the interface. This Field is displayed only when DVMRP is
operational on the interface.
This is the Generation ID value for the interface. This is used by the neighboring routers to
detect that the DVMRP table should be resent.
This is the number of invalid packets received.
This is the number of invalid routes received
This is the number of routes that have been sent on this interface.
This field displays the value of the interface used to reach the neighbor.
This field indicates the IP Address of the DVMRP neighbor for which this entry contains
information.
This field displays the state of the neighboring router. The possible value for this field are
ACTIVE or DOWN.
This field indicates the time since this neighboring router was learned
This field indicates the time remaining for the neighbor to age out. This field is not
applicable if the State is DOWN.
This is the Generation ID value for the neighbor.
This shows the major version of DVMRP protocol of neighbor.
This shows the minor version of DVMRP protocol of neighbor.
This shows the capabilities of neighbor.
497
User's Manual of WGS3-2820/WGS3-5220
Advertisement
Table of Contents
