Planet Networking & Communication WGS3-2820 User Manual page 262

4.6.9.1 VRRP Configuration
Configurable Data
。 VRRP Admin Mode - This sets the administrative status of VRRP in the router to active or inactive. Select enable
or disable from the pulldown menu. The default is disable.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately. These
。
changes will not be retained across a power cycle unless a save is performed.
4.6.9.2 Virtual Router Configuration
Selection Criteria
Figure 4-6-43 VRRP Configuration
Figure 4-6-44 Virtual Router Configuration
262
User's Manual of WGS3-2820/WGS3-5220