Bootpdhcprelay Serverip - Planet Networking & Communication WGS3-2820 User Manual

12.6.4.1 no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay on the system.
▫
Format no bootpdhcprelay minwaittime
▫
Mode Global Config

12.6.5 bootpdhcprelay serverip

This command configures the server IP Address for BootP/DHCP Relay on the system. The <ipaddr> parameter is an IP
address in a 4-digit dotted decimal format.
▫
Default 0.0.0.0
▫
Format bootpdhcprelay serverip <ipaddr>
▫
Mode Global Config
12.6.5.1 no bootpdhcprelay serverip
This command configures the default server IP Address for BootP/DHCP Relay on the system.
▫
Format no bootpdhcprelay serverip
▫
Mode Global Config
12.6.6 show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
▫
Format show bootpdhcprelay
▫
Modes Privileged EXEC
User EXEC
Maximum Hop Count
Minimum Wait Time
(Seconds)
Admin Mode
Server IP Address
Circuit Id Option Mode
Requests Received
Requests Relayed
Packets Discarded
Is the maximum allowable relay agent hops.
Is the minimum wait time.
Represents whether relaying of requests is enabled or disabled.
Is the IP Address for the BootP/DHCP Relay server.
Is the DHCP circuit Id option which may be enabled or disabled.
Is the number or requests received.
Is the number of requests relayed.
Is the number of packets discarded.
452
User's Manual of WGS3-2820/WGS3-5220