Planet Networking & Communication WGS3-2820 User Manual page 93

•
Request Timed OutA directed SNTP request timed out without receiving a response from the SNTP server.
•
Bad Date EncodedThe time provided by the SNTP server is not valid.
•
Version Not SupportedTheSNTP version supported by the server is not compatible with the version supported
by the client.
•
Server UnsychronizedThe SNTP server is not synchronized with its peers. This is indicated via the 'leap
indicator' field on the SNTP message.
•
Server Kiss Of DeathThe SNTP server indicated that no further queries were to be sent to this server. This is
indicated by a stratum field equal to 0 in a message received from a server.
Server IP Address - Specifies the IP address of the server for the last received valid packet. If no message has
。
been received from any server, an empty string is shown.
Address Type - Specifies the address type of the SNTP Server address for the last received valid packet.
。
Server Stratum - Specifies the claimed stratum of the server for the last received valid packet.
。
Reference Clock Id - Specifies the reference clock identifier of the server for the last received valid packet.
。
Server Mode - Specifies the mode of the server for the last received valid packet.
。
Unicast Sever Max Entries - Specifies the maximum number of unicast server entries that can be configured on
。
this client.
Unicast Server Current Entries - Specifies the number of current valid unicast server entries configured for this
。
client.
Broadcast Count - Specifies the number of unsolicited broadcast SNTP messages that have been received and
。
processed by the SNTP client since last reboot.
4.2.12.3 Server Configuration
Configurable Data
Server - Specifies all the existing Server Addresses along with an additional option "Create". When the user selects
。
"Create" another text box "Address" appears where the user may enter Address for Server to be configured.
Figure 4-2-61 SNTP Server Configuration
93
User's Manual of WGS3-2820/WGS3-5220