Table of Contents
Advertisement
no ip pimdm query-interval
This command resets the transmission frequency of hello messages between PIM enabled neighbors to the default value.
▫
Format
no ip pimdm query-interval
▫
Mode
Interface Config
13.4.4 show ip pimdm
This command displays the system-wide information for PIM-DM.
▫
Format
show ip pimdm
▫
Mode
Privileged EXEC and User EXEC
PIM-DM Admin Mode
Unit/Slot/Port
Interface Mode
State
13.4.5 show ip pimdm interface
This command displays the interface information for PIM-DM on the specified interface.
▫
Format
show ip pimdm interface <unit/slot/port>
▫
Mode
Privileged EXEC and User EXEC
Interface Mode
PIM-DM Interface Hello
Interval
13.4.6 show ip pimdm interface stats
This command displays the statistical information for PIM-DM on the specified interface.
▫
Format
show ip pimdm interface stats {<unit/slot/port> | all}
▫
Mode
Privileged EXEC and User EXEC
This field indicates whether PIM-DM is enabled or disabled. This is a configured value.
Valid unit, slot and port number separated by forward slashes.
This field indicates whether PIM-DM is enabled or disabled on this interface. This is a
configured value.
This field indicates the current state of PIM-DM on this interface. Possible values are
Operational or Non-Operational.
This field indicates whether PIM-DM is enabled or disabled on the specified interface. This
is a configured value.
This field indicates the frequency at which PIM hello messages are transmitted on this
interface. By default, the value is 30 seconds.
510
User's Manual of WGS3-2820/WGS3-5220
Advertisement
Table of Contents
