Planet Networking & Communication WGS3-2820 User Manual page 92

Unicast Poll Retry - Specifies the number of times to retry a request to an SNTP server after the first time-out
。
before attempting to use the next configured server when configured in unicast mode. Allowed range is (0 to 10).
Default value is 1.
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect immediately.
。
4.2.12.2 Global Status
Non-Configurable Data
Version - Specifies the SNTP Version the client supports.
。
Supported Mode - Specifies the SNTP modes the client supports. Multiple modes may be supported by a client.
。
Last Update Time - Specifies the local date and time (UTC) the SNTP client last updated the system clock.
。
Last Attempt Time - Specifies the local date and time (UTC) of the last SNTP request or receipt of an unsolicited
。
message.
Last Attempt Status - Specifies the status of the last SNTP request or unsolicited message for both unicast and
。
broadcast modes. If no message has been received from a server, a status of Other is displayed. These values are
appropriate for all operational modes.
•
OtherNone of the following enumeration values.
•
SuccessThe SNTP operation was successful and the system time was updated.
Figure 4-2-60 SNTP Global Status
92
User's Manual of WGS3-2820/WGS3-5220