Port Lacpmode All; Port-Channel; Port-Channel Adminmode - Planet Networking & Communication WGS3-2820 User Manual

8.6.13.1 no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
▫
Format no port lacpmode
▫
Mode Interface Config

8.6.14 port lacpmode all

This command enables Link Aggregation Control Protocol (LACP) on all ports.
▫
Format port lacpmode all
▫
Mode Global Config
8.6.14.1 no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
▫
Format no port lacpmode all
▫
Mode Global Config

8.6.15 port-channel

This command configures a new port-channel (LAG) and generates a logical slot and port number for it. Display this number
using the "show port-channel".
Before including a port in a port-channel, set the port physical mode. See 'speed' command.
Note
:
▫
Format port-channel <name>
▫
Mode Global Config

8.6.16 port-channel adminmode

This command enables a port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option
all sets every configured port-channel with the same administrative mode setting.
▫
Format port-channel adminmode {<logical slot/port> | all}
▫
Mode Global Config
8.6.16.1 no port-channel adminmode
This command disables a port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option
all sets every configured port-channel with the same administrative mode setting.
▫
Format no port-channel adminmode {<logical slot/port> | all}
▫
Mode Global Config
▫
User's Manual of WGS3-2820/WGS3-5220
351