Table of Contents
Advertisement
12.7.50 show ip ospf interface stats
This command displays the statistics for a specific interface. The information below will only be displayed if OSPF is enabled.
▫
Format
show ip ospf interface stats <slot/port>
▫
Modes
Privileged EXEC
▫
User EXEC
OSPF Area ID
Area Border Router Count The total number of area border routers reachable within this area. This is initially zero,
AS Border Router Count
Area LSA Count
IP Address
OSPF Interface Events
Virtual Events
Neighbor Events
External LSA Count
Sent Packets
Received Packets
Discards
Bad Version
Source Not On Local
Subnet
Virtual Link Not Found
The area id of this OSPF interface.
and is calculated in each SPF pass.
The total number of Autonomous System border routers reachable within this area.
The total number of link-state advertisements in this area's link-state database, excluding
AS External LSAs.
The IP address associated with this OSPF interface
The number of times the specified OSPF interface has changed its state, or an error has
occurred
The number of state changes or errors that occurred on this virtual link.
The number of times this neighbor relationship has changed state, or an error has
occurred.
The number of external (LS type 5) link-state advertisements in the link-state database.
The number of OSPF packets transmitted on the interface.
The number of valid OSPF packets received on the interface.
The number of received OSPF packets discarded because of an error in the packet or an
error in processing the packet.
The number of received OSPF packets whose version field in the OSPF header does not
match the version of the OSPF process handling the packet.
The number of received packets discarded because the source IP address is not within a
subnet configured on a local interface.
(NOTE: This field only applies to OSPFv2.)
The number of received OSPF packets discarded where the ingress interface is in a
non-backbone area and the OSPF header identifies the packet as belonging to the
backbone, but OSPF does not have a virtual link to the packet's sender.
473
User's Manual of WGS3-2820/WGS3-5220
Advertisement
Table of Contents
