Show Ip Igmp Snooping Mrouter; Show Ip Igmp Snooping Interface - Planet Networking & Communication WGSW-24010 User Manual

Use immediate leave only where there is only one host connected to a port.
Example
The following example configures the host leave-time-out to 60 seconds.
Console (config)# interface vlan 2
Console (config-if)# ip igmp snooping leave-time-out 60

3.9.7 show ip igmp snooping mrouter

The show ip igmp snooping mrouter User EXEC command displays information on dynamically learned multicast router
interfaces.
Syntax
show ip igmp snooping mrouter [interface vlan-id]
§ vlan_id — VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows IGMP snooping mrouter information.
Console # show ip igmp snooping mrouter
VLAN Ports
--------- -----------
2 e1

3.9.8 show ip igmp snooping interface

The show ip igmp snooping interface User EXEC command displays IGMP snooping configuration.
Syntax
show ip igmp snooping interface vlan-id
§ vlan_id — VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The example displays IGMP snooping information.
Console # show ip igmp snooping interface 1
IGMP Snooping is globaly disabled
IGMP Snooping is disabled on VLAN 1
66