Planet Networking & Communication WGS3-2820 User Manual page 285

Non-Configurable Data
Version - The current value of the DVMRP version string.
o
Total Number of Routes - The number of routes in the DVMRP routing table.
o
Reachable Routes - The number of routes in the DVMRP routing table that have a non-infinite metric.
o
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately. These
o
changes will not be retained across a power cycle unless a save is performed.
Only one multicast routing protocol could be enabled at one time. That means, for example, once
Note
:
the PIM-DM admin mode is enabled, the user is not able to enable the DVMRP.
4.7.3.2 DVMRP Interface Configuration
Selection Criteria
Slot/Port - Select the interface for which data is to be configured. You must configure at least one router interface
o
before you configure a DVMRP interface. Otherwise you will see a message telling you that no router interfaces are
available, and the configuration screen will not be displayed.
Configurable Data
Interface Mode - Select enable or disable from the pulldown menu to set the administrative mode of the selected
o
DVMRP routing interface.
Figure 4-6-63 DVMRP Interface Configuation
285
User's Manual of WGS3-2820/WGS3-5220