Planet Networking & Communication WGS3-2820 User Manual page 182

。 Direction - Displays selected packet filtering direction for ACL.
。 ACL Type - Displays the type of ACL assigned to selected interface and direction.
。 ACL Identifier - Displays the ACL Number(in case of IP ACL) or ACL Name(in case of MAC ACL) identifying the
ACL assigned to selected interface and direction.
。 Sequence Number - Displays the Sequence Number signifying the order of specified ACL relative to other ACLs
assigned to selected interface and direction.
Command Buttons
。 Submit - Send the updated configuration to the switch. Configuration changes take effect immediately. These
changes will not be retained across a power cycle unless a save is performed.
。 Remove - Removes the currently selected ACL Interface Direction Mapping from the switch configuration.
One ACL can ba applied to an interface a time, no matter MAC ACL or IP ACL.
Note
:
User's Manual of WGS3-2820/WGS3-5220
182