Table of Contents
Advertisement
The IP address parameter must match that of a previously configured RADIUS accounting server. The following information
regarding the statistics of the RADIUS accounting server is displayed.
▫
Accounting Server IP Address - IP Address of the configured RADIUS accounting server
▫
Round Trip Time - The time interval, in hundredths of a second, between the most recent Accounting-Response and the
Accounting-Request that matched it from the RADIUS accounting server.
▫
Requests - The number of RADIUS Accounting-Request packets sent to this accounting server. This number does not
include retransmissions.
▫
Retransmission - The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server.
▫
Responses - The number of RADIUS packets received on the accounting port from this server.
▫
Malformed Responses - The number of malformed RADIUS Accounting-Response packets received from this server.
Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as
malformed accounting responses.
▫
Bad Authenticators - The number of RADIUS Accounting-Response packets containing invalid authenticators received
from this accounting server.
▫
Pending Requests - The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out
or received a response.
▫
Timeouts - The number of accounting timeouts to this server.
▫
Unknown Types - The number of RADIUS packets of unknown types, which were received from this server on the
accounting port.
▫
Packets Dropped - The number of RADIUS packets received from this server on the accounting port and dropped for
some other reason.
10.1.23 show authentication
This command displays the ordered authentication methods for all authentication login lists.
▫
Format
show authentication
▫
Mode
Privileged EXEC
▫
Authentication Login List - This displays the authentication login listname.
▫
Method 1 - This displays the first method in the specified authentication login list, if any.
▫
Method 2 - This displays the second method in the specified authentication login list, if any.
▫
Method 3 - This displays the third method in the specified authentication login list, if any.
10.1.24 show authentication users
This command displays information about the users assigned to the specified authentication login list. If the login is assigned to
non-configured users, the user "default" will appear in the user column.
▫
Format
show authentication users <listname>
▫
Mode
Privileged EXEC
▫
User - This field displays the user assigned to the specified authentication login list.
▫
Component - This field displays the component (User or 802.1x) for which the authentication login list is assigned.
User's Manual of WGS3-2820/WGS3-5220
411
Advertisement
Table of Contents
