Planet Networking & Communication WGS3-2820 User Manual page 309

Component BSR Expiry Time - Displays the minimum time remaining before the bootstrap router in the local
o
domain will be declared.
Component CRP Hold Time - The hold time of the component when it is a candidate Rendezvous Point in the local
o
domain.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
o
4.7.6.6 PIM-SM RP Set Summary
Non-Configurable Data
Group Address - Displays IP multicast group address.
o
Group Mask - Displays Multicast group address mask.
o
Address - Displays IP address of the Candidate-RP.
o
Hold Time - The holdtime of a Candidate-RP.If the local router is not the BSR, this value is 0.
o
Expiry Time Component - The minimum time remaining before the Candidate-RP will be declared.
o
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
o
Figure 4-6-83 PIM-SM RP Set Summary
309
User's Manual of WGS3-2820/WGS3-5220