Planet Networking & Communication WGS3-2820 User Manual page 307

4.7.6.4 PIM-SM Interface Summary
Selection Criteria
Slot/Port - Select the slot and port for which data is to be displayed. Slot 0 is the base unit.
o
Non-Configurable Data
Mode - The administrative status of PIM-SM in the router: either enable or disable.
o
IP Address - The IP address of the selected PIM interface.
o
Net Mask - The network mask for the IP address of the selected PIM interface.
o
Designated Router - The Designated Router on the selected PIM interface. For point-to- point interfaces, this object
o
has the value 0.0.0.0.
Hello Interval - The frequency at which PIM Hello messages are transmitted on the selected interface.
o
Figure 4-6-81 PIM-SM Interface Summary
307
User's Manual of WGS3-2820/WGS3-5220