Show Ip Igmp Interface Membership - Planet Networking & Communication WGS3-2820 User Manual

Query Interval
Query Max Response Time This field indicates the maximum query response time advertised in IGMPv2 queries on
Robustness
Startup Query Interval
Startup Query Count
Last Member Query
Interval
Last Member Query Count This value is the number of Group-Specific Queries sent before the router assumes that

13.3.18 show ip igmp interface membership

This command displays the list of interfaces that have registered in the multicast group.
▫
Format show ip igmp interface membership <multiipaddr> [detail]
▫
Mode Privileged EXEC
Interface
Interface IP
State
Group Compatibility Mode The group compatibility mode (v1, v2 or v3) for the specified group on this interface.
Source Filter Mode
If detail is specified, the following fields are displayed:
This field indicates the frequency at which IGMP Host-Query packets are transmitted on
this interface. This is a configured value.
this interface. This is a configured value.
This field displays the tuning for the expected packet loss on a subnet. If a subnet is
expected to be have a lot of loss, the Robustness variable may be increased for that
interface. This is a configured value.
This value indicates the interval between General Queries sent by a Querier on startup.
This is a configured value.
This value is the number of Queries sent out on startup, separated by the Startup Query
Interval. This is a configured value.
This value indicates the Maximum Response Time inserted into Group-Specific Queries
sent in response to Leave Group messages. This is a configured value.
there are no local members. This is a configured value.
Valid unit, slot and port number separated by forward slashes.
This displays the IP address of the interface participating in the multicast group.
This displays whether the interface has IGMP in Querier mode or Non-Querier mode.
The source filter mode (Include/Exclude) for the specified group on this interface. This is
"-----" for IGMPv1 and IGMPv2 Membership Reports.
507
User's Manual of WGS3-2820/WGS3-5220