Planet Networking & Communication WGS3-2820 User Manual page 279

4.7.2.3 IGMP Interface Configuration Summary
Slot/Port - Select the slot and port for which data is to be displayed. Slot 0 is the base unit.
o
Non-Configurable Data
Interface Mode - The administrative status of IGMP on the selected interface.
o
IP Address - The IP address of the selected interface.
o
Subnet Mask - The subnet mask for the IP address of the selected interface.
o
Protocol State - The operational state of IGMP on the selected interface.
o
Version - The version of IGMP configured on the selected interface.
o
Query Interval - The frequency at which IGMP host-query packets are transmitted on the selected interface.
o
Query Max Response Time - The maximum query response time advertised in IGMPv2 queries sent from the
o
selected interface.
Figure 4-6-58 IGMP Configuration Summary
279
User's Manual of WGS3-2820/WGS3-5220