Ip Multicast; Multicast - Planet Networking & Communication WGS3-2820 User Manual

4.7 IP Multicast

The WGS3 supports the following Multicast routing protocol :
DVMRP
IGMP

Multicast

Mdebug
PIM-DM
PIM-SM
4.7.1 Multicast
4.7.1.1 Multicast Global Configuration
Selection Criteria
Admin Mode - Select enable or disable to set the administrative status of Multicast Forwarding in the router. The
o
default is disable.
Protocol State - The operational state of the multicast forwarding module.
o
Table Maximum Entry Count - The maximum number of entries in the IP Multicast routing table.
o
Number Of Packets For Which Source Not Found - The number of multicast packets that were supposed to be
o
routed but which failed the RPF check.
Figure 4-6-49 Multicast Global Configuation
269
User's Manual of WGS3-2820/WGS3-5220