Show Arp Brief - Planet Networking & Communication WGS3-2820 User Manual

Table of Contents

Advertisement

Cache Size
Dynamic Renew Mode
Total Entry Count Current /
Peak
Static Entry Count Current
/ Max
The following are displayed for each ARP entry.
IP Address
MAC Address
Interface
Type
Age

12.1.18 show arp brief

This command displays the brief Address Resolution Protocol (ARP) table information.
Format
show arp brief
Mode
Privileged EXEC
Age Time (seconds)
Response Time (seconds) Is the time it takes for an ARP request timeout. This value was configured into the unit.
Retries
Cache Size
Dynamic Renew Mode
Total Entry Count Current /
Peak
Static Entry Count Current
/ Max
Is the maximum number of entries in the ARP table. This value was configured into the
unit.
Displays whether the ARP component automatically attempts to renew dynamic ARP
entries when they age out.
Field listing the total entries in the ARP table and the peak entry count in the ARP table.
Field listing the static entry count in the ARP table and maximum static entry count in the
ARP table.
Is the IP address of a device on a subnet attached to an existing routing interface.
Is the hardware MAC address of that device.
Is the routing slot/port associated with the device ARP entry.
Is the type that was configured into the unit. The possible values are Local, Gateway,
Dynamic and Static.
This field displays the current age of the ARP entry since last refresh (in hh:mm:ss format
Is the time it takes for an ARP entry to age out. This value was configured into the unit.
Age time is measured in seconds.
Response time is measured in seconds.
Is the maximum number of times an ARP request is retried. This value was configured into
the unit.
Is the maximum number of entries in the ARP table. This value was configured into the
unit.
Displays whether the ARP component automatically attempts to renew dynamic ARP
entries when they age out.
Field listing the total entries in the ARP table and the peak entry count in the ARP table.
Field listing the static entry count in the ARP table and maximum static entry count in the
ARP table.
432
User's Manual of WGS3-2820/WGS3-5220

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs3-5220

Table of Contents