Cost is zero.
Port ID - The port identifier for the specified port within the selected MST instance. It is made up from the port
。
priority and the interface number of the port.
Port Up Time Since Counters Last Cleared - Time since the counters were last cleared, displayed in Days,
。
Hours, Minutes, and Seconds.
Port Mode - Spanning Tree Protocol Administrative Mode associated with the port or lag. The possible values are
。
Enable or Disable.
Port Forwarding State - The Forwarding State of this port.
。
Port Role - Each MST Bridge Port that is enabled is assigned a Port Role for each spanning tree. The port role will
。
be one of the following values: Root Port, Designated Port, Alternate Port, Backup Port, Master Port or Disabled
Port.
Designated Root - Root Bridge for the selected MST instance. It is made up using the bridge priority and the base
。
MAC address of the bridge.
Designated Cost - Path Cost offered to the LAN by the Designated Port.
。
Designated Bridge - Bridge Identifier of the bridge with the Designated Port. It is made up using the bridge priority
。
and the base MAC address of the bridge.
Designated Port - Port Identifier on the Designated Bridge that offers the lowest cost to the LAN. It is made up
。
from the port priority and the interface number of the port.
Figure 4-3-38 Spanning Tree MST Port Configuration/Status
User's Manual of WGS3-2820/WGS3-5220
142