Show Ip Dvmrp Nexthop - Planet Networking & Communication WGS3-2820 User Manual

Table of Contents

Advertisement

Received Routes
Rcvd Bad Pkts
Rcvd Bad Routes

13.2.7 show ip dvmrp nexthop

This command displays the next hop information on outgoing interfaces for routing multicast datagrams.
Format
show ip dvmrp nexthop
Modes
Privileged EXEC User EXEC
Source IP
Source Mask
Next Hop Interface
Type
13.2.8 show ip dvmrp prune
This command displays the table listing the router's upstream prune information.
Format
show ip dvmrp prune
Mode
Privileged EXEC and User EXEC
Group IP
Source IP
Source Mask
Expiry Time (secs)
This shows the number of routes received from the neighbor.
This field displays the number of invalid packets received from this neighbor.
This field displays the number of correct packets received with invalid routes.
This field displays the sources for which this entry specifies a next hop on an outgoing
interface.
This field displays the IP Mask for the sources for which this entry specifies a next hop on
an outgoing interface.
This field displays the interface in unit/slot/port format for the outgoing interface for this
next hop.
This field states whether the network is a LEAF or a BRANCH.
This field identifies the multicast Address that is pruned.
This field displays the IP Address of the source that has pruned.
This field displays the network Mask for the prune source. It should be all 1s or both the
prune source and prune mask must match.
This field indicates the expiry time in seconds. This is the time remaining for this prune to
age out.
498
User's Manual of WGS3-2820/WGS3-5220

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs3-5220

Table of Contents