Table of Contents
Advertisement
If you specify an IP address for the neighbor router, the following fields display:
Interface
Neighbor IP Address
Interface Index
Area ID
Options
Router Priority
Dead Timer Due
State
Events
Retransmission Queue
Length
12.7.52 show ip ospf range
This command displays information about the area ranges for the specified <areaid>. The <areaid> identifies the OSPF area
whose ranges are being displayed.
▫
Format
show ip ospf range <areaid>
▫
Modes
Privileged EXEC
User EXEC
Area ID
IP Address
Subnet Mask
Lsdb Type
Valid slot and port number separated by forward slashes.
Shows the IP address of the neighbor router
Shows the interface ID of the neighbor router
Shows the area ID of the OSPF area associated with the interface
An integer value that indicates the optional OSPF capabilities supported by the neighbor.
The neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables
received Hello Packets to be rejected (i.e., neighbor relationships will not even start to
form) if there is a mismatch in certain crucial OSPF capabilities.
Displays the OSPF priority for the specified interface. The priority of an interface is a
priority integer from 0 to 255. A value of '0' indicates that the router is not eligible to
become the designated router on this network.
Shows the amount of time, in seconds, to wait before the router assumes the neighbor is
unreachable.
Shows the state of the neighboring routers.
The number of times this neighbor relationship has changed state, or an error has
occurred.
Is an integer representing the current length of the retransmission queue of the specified
neighbor router Id of the specified interface.
The area id of the requested OSPF area.
An IP Address which represents this area range.
A valid subnet mask for this area range.
The type of link advertisement associated with this area range.
476
User's Manual of WGS3-2820/WGS3-5220
Advertisement
Table of Contents
