Planet Networking & Communication WGS3-2820 User Manual page 158

Windows Platform RADIUS Server Configuration
1. Setup the RADIUS server and assign the client IP address to the Web-Smart switch. In this case, field in the default IP
Address of the Web-Smart switch with 192.168.0.100. And also make sure the shared secret key is as same as the one
you had set at the switch RADIUS server – 12345678 at this case.
2. Configure ports attribute of 802.1X, the same as "802.1X Port Status Configuration".
Figure 4-4-9 RADIUS Server Configuration
Figure 4-4-10 Windows Server RADIUS Server setting
158
User's Manual of WGS3-2820/WGS3-5220