Table of Contents
Advertisement
Interface
Group Compatibility Mode The group compatibility mode (v1, v2 or v3) for the specified group on this interface.
Source Filter Mode
Source Hosts
Expiry Time
13.3.19 show ip igmp interface stats
This command displays the IGMP statistical information for the given interface. The statistics are only displayed when the
interface is enabled for IGMP.
▫
Format
show ip igmp interface stats <unit/slot/port>
▫
Modes
Privileged EXEC User EXEC
Querier Status
Querier IP Address
Querier Up Time
Querier Expiry Time
Wrong Version Queries
Number of Joins
Number of Groups
Valid unit, slot and port number separated by forward slashes.
The source filter mode (Include/Exclude) for the specified group on this interface. This is
"-----" for IGMPv1 and IGMPv2 Membership Reports.
This displays the list of unicast source IP Addresses in the group record of the IGMPv3
Membership Report with the specified multicast group IP Address. This is "-----" for
IGMPv1 and IGMPv2 Membership Reports.
This displays the amount of time remaining to remove this entry before it is aged out. This
is "----" for IGMPv1 and IGMPv2 Membership Reports.
This field indicates the status of the IGMP router, whether it is running in Querier mode or
Non-Querier mode.
This field displays the IP Address of the IGMP Querier on the IP subnet to which this
interface is attached.
This field indicates the time since the interface Querier was last changed.
This field displays the amount of time remaining before the Other Querier Present Timer
expires. If the local system is the querier, the value of this object is zero.
This field indicates the number of queries received whose IGMP version does not match
the IGMP version of the interface.
This field displays the number of times a group membership has been added on this
interface.
This field indicates the current number of membership entries for this interface
508
User's Manual of WGS3-2820/WGS3-5220
Advertisement
Table of Contents
