Planet Networking & Communication WGS3-2820 User Manual page 293

4.7.4.2 Mrinfo Show
This screen displays the results of an mrinfo command.
Non-Configurable Data
Router Interface - The IP address of the router interface for which configuration information was requested.
o
Neighboring router's IP Address - The IP address of the neighboring router.
o
Metric - The routing metric for this router.
o
TTL Threshold - The time-to-live threshold on this hop.
o
Flags - The flags indicating whether the router is an IGMP querier or whether or not it has neighbors (leaf router).
o
Command Buttons
New Mrinfo - Redirect the web browser to the Mrinfo Run screen so that you can initiate another mrinfo command.
o
Refresh - Refresh the content of the screen with the latest data available on the router. Typically, it takes around 20
o
seconds to process the results after you have initiated the mrinfo command. The contents of the screen have to be
refreshed to display the latest results.
Figure 4-6-69 Mrinfo Show
293
User's Manual of WGS3-2820/WGS3-5220