Planet Networking & Communication WGS3-2820 User Manual page 196

4.5.5.4 Interface Configuration
Class of Service (CoS) Interface Configuration
Selection Criteria
。 Slot/Port - Specifies all CoS configurable interfaces. The option "Global" represents the most recent global
configuration settings. These may be overridden on a per-interface basis.
Configurable Data
Interface Shaping Rate - Specifies the maximum bandwidth allowed, typically used to shape the outbound
。
transmission rate. This value is controlled independently of any per-queue maximum bandwidth configuration. It is
effectively a second-level shaping mechanism. Default value is 0. Valid Range is (0 to 10000000) KBPS with a step
size of 64 .The value 0 means maximum is unlimited.
Command Buttons
。 Restore Defaults - Restores default settings.
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately. These
。
changes will not be retained across a power cycle unless a save is performed.
4.5.5.5 Interface Queue Configuration
Class of Service (CoS) Interface Queue Configuration
Figure 4-5-29 CoS Interface Configuation
196
User's Manual of WGS3-2820/WGS3-5220