Planet Networking & Communication WGS3-2820 User Manual page 311

Configurable Data
IP Address - IP Address of the RP to be created or deleted.
o
Group - Group Address of the RP to be created or deleted.
o
Group Mask - Group Mask of the RP to be created or deleted.
o
Command Buttons
Submit - Attempts to create the specified static RP IP Address for the PIM-SM router. Configuration changes take
o
effect immediately. These changes will not be retained across a power cycle unless a save is performed.
Delete - Attempts to remove the specified static RP IP Address for the PIM-SM router. Configuration changes take
o
effect immediately. These changes will not be retained across a power cycle unless a save is performed.
User's Manual of WGS3-2820/WGS3-5220
311